SAVE 15% OFF THE R.R.P THIS JUNE AT TURNER GROUNDSCARE
Grillo Climber 10 AWD 27 is a unique hydrostatic brush-cutter. The permanent 4WD system combined with the 27 HP powerful engine (22 HP net power) offers brilliant performance on severe slopes and low-adherence grounds.
Remarkably efficient on high grass and up to 2.5 cm shrubs, this machine is ideal for agricultural and professional use.
Its compact size has been designed to boost its performance on slopes, and the Kanzaki hydrostatic transmission with the differential lock on the rear wheels allows you to work with maximum safety and stability.
CUTTING SYSTEM
The cutting height is adjusted via a soft and comfortable lever. The cutting deck stops in the chosen position when the lever is released.
Blades are engaged via an electric switch located near the steering wheel. The electromagnetic clutch is fitted with a blade brake.
The single-blade cutting deck has a working width of 98 cm, and the progressive and assisted cutting height ranges from 3.5 cm to a maximum of 13.5 cm. This 10 cm range allows the operator to negotiate curbs and obstacles allowing them to work on uneven grounds.
The whole cutting system is always kept parallel to the ground, this ensures top-cutting quality even after years of service.
CLICK IMAGE TO BROWSE/SHOP ONLINE HERE
The blade is made of special steel and has a low-noise profile, the double-cutting tips are retractable in case of impact and can be turned around when one side is worn out.
The whole structure of the cutting deck is very robust and remarkably resistant to impacts with stones.
The large diameter blade shaft and cutting transmission guarantee reliability even under the most demanding conditions and for many hours in total safety.
The cutting deck has two side protection baffles that can be raised to make maintenance and cleaning easier.
THE ENGINE
The twin-cylinder, four stroke petrol engine has a 22 HP net power. It is fitted with a cyclonic professional air filter especially suitable for dusty environments and very easy to access for routine cleaning.
The low-emission silencer is made of stainless steel. The fuel tank has a capacity of 13 litres and is equipped with a large filler for easier refuelling and a built-in fuel indicator on the cap.
THE TRANSMISSION
The permanent four-wheel drive transmission is composed of two hydrostatic axles. The rear hydrostatic axle is equipped with differential lock via pedal, which proves to be exceptionally useful on severe slopes and low-adherence grounds.
Larger TRACTOR wheels are fitted to achieve more adherence and greater comfort on irregular ground.
The front wheel axle steers and tilts and it is equipped with a hydraulic system that combined with the differential on the rear axle ensures permanent drive on all four wheels to prevent the wheels from skidding even in the tightest turns.
The roll-bar can be tilted in a couple of seconds to allow working underneath foliage.
The roll-bar can be either raised or lowered via two levers, no other tools are required
THE SEAT AND CONTROLS
Climber 10 is equipped with a seat whose suspension can be adjusted according to the operator’s weight. In addition the whole seat support is fitted with twin shock-absorbers to ensure greater comfort even after a long working day.
Controls are comfortable, the forward control lever enables the operator to choose the exact ground speed. When operating the brake pedal, the rear axle is braked and the forward lever comes back automatically to its stop position.
On the upper par of the cutting deck there is a baffle, that if positioned, inside the cutting deck, evenly distributes the grass onto the lawn.
The rotating beacon can be mounted on the roll-bar and is then connected to the 12V plug.
THE MANUFACTURING
Each single component, from the simplest to the most complex, is of high quality. Frame, handlebar, cutting deck, are all designed and built by Grillo using exclusively premium materials and modern technology to ensure 100% controlled, high quality.
Painting of Grillo machines incorporates a double electrostatic powder coating process. At the first stage are the washing baths and preparation, then a first protective coat is applied which is then baked in a special oven, this has proven to be the best base for the application of the finish. The second coat consists of powder coating and still further baking in an oven at 190°C, this then produces the characteristic hardness and shine.
Assembling operations of Climber 10 AWD 27 are carried out meticulously by specialist staff.
It then undergoes a rigorous final test with its engine running to ensure that all of its functions work properly.
BOOK YOUR DEMO-OR REQUEST MORE INFO VIA THIS FORM TODAY!
CLICK BELOW TO BROWSE/BUY AND CHECK OUT TURNER GROUNDSCARE’S OTHER EXCLUSIVE DEALS ON GRILLO MACHINERY-
